Reference HS22F12
HS22F12 - Insert for flat groove for mast profile opening width 11.8 mm
Available in 7 models for round or flat bolt ropes.
Custom models for special bolt ropes can be manufactured on request.
Allow for 17 inserts for 2 m of track with 120 mm fastener spacing, or for 1 m of track with 60 mm spacing.
Screw locking (screws supplied) during installation must be done with Loctite 222 threadlocker or equivalent.
Data sheet
HS22F12 - Insert for flat groove for mast profile opening width 11.8 mm
HS22.221 - Mast track for inserts - Hole size: 120 mm - Length: 2m
HS22.222 - Mast track for inserts - Drilling: 60mm - Length: 2m
HS22.321 - Mast track for insert - 120 mm hole - Length: 2.99 m
HS22.322 - Mast track for insert - 60 mm hole - Length: 2.99 m
HS22.311 - Mast track for screwing - Drilling 120mm - Length: 2.99m
HS22F14 - Insert for flat groove for mast profile opening width 13.8 mm
HS22.05 - Side batten for reinforcing reefs for carbon rail
HS22.221 - Mast track for inserts - Hole size: 120 mm - Length: 2m
HS22.330 - Track for carbon mast to be glued - For luff or traveller - Length: 2.99m
HS22.313 - Rail de mât à visser - Perçage 30mm - Longueur=2,99M
HS22R05 - Insert for round groove for mast profile opening width 4.7 mm
HS22.03 - UV-resistant plastic rail end cap for carbon rail HS22.330 - 2 x Ø5mm screws
HS22R04 - Insert for round groove for mast profile opening width 3.9 mm
HS22.185 - Mainsail headboard for hook - Length 185 mm - Load sheave Ø40mm for 2:1 halyard - SWL = 2000 kg - 450 g - For CLASS40
HS22F08 - IInsert for flat groove for mast profile opening width 7.8 mm
HS22F05 - Insert for flat groove for mast profile opening width 4.7 mm
HS22F10 - Insert for flat groove for mast profile opening width 9.8 mm
