Reference 10121_R
10121_R - Resin roller sheave Ø100 mm for LOOPER block - SWL = 2400 kg / MWL = 3200 kg
ROLLER BEARING SHEAVES
In some cases, it is important to reduce the friction of the blocks as much as possible, even if this leads to a reduction in the maximum loads. When compared with the Composite Fibre bushing version, the roller bearing shaves offer a lower resistance but a greater smoothness.
Antal offers a range of roller sheaves, which can replace the traditional sheaves on the OPF series blocks, and a range for the Looper series. The main characteristics of these sheaves are described in
the following tables.
Data sheet
10121_R - Resin roller sheave Ø100 mm for LOOPER block - SWL = 2400 kg / MWL = 3200 kg
LS1100 - Simple LOOPER block with loop - Type OPF Ø100x16mm - SWL=3500Kg.
LS1101 - Simple LOOPER block with becket and loop - Type OPF Ø100x16mm - SWL=3500Kg.
08019_R - Ø80 mm resin roller sheave for LOOPER block - SWL = 1600 kg / MWL = 2000 kg
08019_F - Single resin ball sheave Ø80 mm for ANTAL OPF block - SWL 2200 kg
801.110 - "Tulip" composite fibre sheave - Ø110X60 - SWL=9000 kg
801.045 - "Tulip" composite fibre sheave - Ø45X31- High-strength resin SWL=1000Kg
